Home
Search results “Wooden soap making mold plans”
Soap Molds - The Best New Design & Easy To Make!
 
15:00
Soap Molds - The Best New Design & Easy To Make! Easiest to use, easy to build, inexpensive design! They are stackable with easy to make lids! You're gonna LOVE IT! Parts List: Ends X2pieces - 4"Wide X 3 1/4"High X 3/4" Thick Sides X2pieces - 4 3/4" Wide X 16" Long X 3/4" Thick Bottoms X2pieces - 2" Wide X 16" Long X 3/4" Thick Lid X1piece - 5 9/16" Wide X 16 1/16" Long X 3/4" Thick Lid Sides X2pieces - 1 1/4" High X 16" Long X 1/4" Thick Lid Ends X2pieces - 1 1/4" High X 5 1/2" Long X 1/4" Thick
How to make a Wooden Soap Mold - diy
 
03:36
I created this video with the YouTube Video Editor (http://www.youtube.com/editor) What you need: 3 pieces of poplar 1/2 in x 3 1/2 in x 36 in 2 carriage bolts 1/4 in x 5 1/2 in 2 washers 1/4 in 2 wing nuts 1/4 in wood glue drill 5/16 drill bit sandpaper I purchased all my supplies at Home Depot and they cut the wood for me for free! :) All my supplies cost around $14 and the Bramble Berry silicone liner was $15. What to do: Cut your wood or have it cut to 19 1/2 in. From one of the extra pieces cut two 3 in pieces for the ends of your mold. Sand the edges as needed. Drill a hole in the side piece about 1 1/2 in down and over about 1/4 to 1/2 in. Line up the other side piece under that hole and drill down through both pieces so they match up. Do the same to the other side. Glue the side pieces to the bottom piece with your wood glue. Let it completely dry. Put the carriage bolts through the holes, attach the washers and wing nuts and then put your end pieces inside the bolts. Line your new mold with parchment paper, a thin trash bag or the Bramble Berry 5 lb silicone mold liner. http://www.brambleberry.com/Silicone-Liner-for-5-lb-Wood-Mold-P5270.aspx NOTE: This mold should NOT go in the oven for CPOP. You can screw or nail the sides onto the mold instead of gluing if you want to use this mold in the oven. :)
Views: 34303 The Yum-Yum Shoppe
How I Line my Soap Molds - For Cold Processed Soaps
 
07:58
This video was made possible by my fans on Patreon, thank you for supporting my videos here: www.patreon.com/ArianeArsenault I will show you how I line my soap molds in hopes that it can help you in your own soap making journey! Help Translate this Video: http://www.youtube.com/timedtext_video?v=R33VU6v2rc0&ref=share My Webstore: http://www.lafilledelamer.com/shop This video was recorded with my New Vlogging Setup, watch my video on this here: And you can check out the equipment I purchased on amazon here: Nikon D5600 (Body Only): http://amzn.to/2oT7dGH Rode Videomic: http://amzn.to/2phugHV Nikon 27126 EN-EL14a Rechargeable Li-Ion Battery: http://amzn.to/2nXRx1g Sandisk Extreme SDHC UHS-I 32g Card: http://amzn.to/2oSSbkn NIKON AF-P DX NIKKOR 18-55mm f/3.5-5.6G Lens: http://amzn.to/2nurVg5 Nikon 50mm f/1.8G AF-S NIKKOR FX Lens: http://amzn.to/2oST4cm Manfrotto 128RC Video Fluid Head: http://amzn.to/2phy0cq If you are a soapmaker and would like to purchase some of the tools I use to make my soaps you can follow any of these affiliated links. This means that if you purchase from my links, I get a small revenue, helping me sustain the content I create, with no extra cost for you. I only share links to products I believe in, tried and enjoy using myself! Soapmaking books The Soapmaker's Companion: http://amzn.to/2oSYhRA Soap Crafting: http://amzn.to/2oT7s4r Pure Soapmaking: http://amzn.to/2nY09Vi My favorite soap making tools: Cuisinart stick blender: http://amzn.to/2oSYrZc Crafter's Choice Silicone Mold: http://amzn.to/2oVrDfg Shrink Wrap System 14": http://amzn.to/2phU1aS Double Handle Knife: http://amzn.to/2oTgn67 24'' freezer Paper: http://amzn.to/2pgAKuh 24'' Freezer Paper stand & Cutter: http://amzn.to/2pkvXFk Ariane Arsenault is a participant in the Amazon.com.ca, Inc. Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.” Facebook https://www.facebook.com/LaFilledelaMerSavonnerieArtisanale Instagram: https://instagram.com/lafilledelamer/ Twitter https://twitter.com/filledelamer81 Pinterest: https://www.pinterest.com/lafilledelamer/ Flickr: https://www.flickr.com/photos/lafilledelamer/ Snapchat Username: arianearseno Music: Jay Flamenco Album: Jay Sensation Song Title: Offshore Lover Buy Jay 's Album "Jay Sensations" right here: http://bit.ly/2pBk0us Subscribe to Jay Flamenco's YouTube Channel and help him get his first 100 subscribers! https://www.youtube.com/channel/UC8CgvEcQq-v0AQBtgnhftyQ Listen online: https://myspace.com/jayflamenco
Views: 31715 Ariane Arsenault
Nurture Soap Supplies 5 Pounds Silicone Liner & Wooden Mold Review
 
13:50
In this video, I will be making a review of the "Nurture Soap Supplies'' 5 pounds silicone loaf soap mold by making cold processed soap in it! I will let you know how it worked for me and comment all the way through the process! To order this silicone loaf soap mold and rainbow micas http://www.nurturesoapsupplies.com To order the fragrance in this video http://www.brambleberry.com To follow me on the web My website http://www.lafilledelamer.ca My twitter https://twitter.com/filledelamer81 My Facebook https://www.facebook.com/pages/La-fille-de-la-mer-Savonnerie-Artisanale/110111837687?bookmark_t=page My blog http://lafilledelamer.wordpress.com/ My Pinterest http://www.pinterest.com/lafilledelamer/pins/ Music by Ariane Arsenault
Views: 107163 Ariane Arsenault
DIY How To Make Wooden Soap Molds 5 pounds mold
 
11:46
This is how I made my four wooden soap molds. Each hold 5 pounds of soap.
Views: 646 Home Of Soaps
WHERE TO GET WOOD SOAP MOLDS - YOUR QUESTIONS ANSWERED
 
23:29
► Please take a moment to give that SUBSCRIBE and LIKE button some love!!! (It's free!) Thank you for watching! If you like this video please share it with your friends! Make sure to check out my other tutorial videos too! From Soap Making, to Bath Bombs, to Aroma Beads, I have tutorial videos on all kinds of fun things to make! Check out Scentimental Gifts, http://www.scentdeals.com You can get fragrance and essential oils, soap and candle colors, aroma beads, crystal potpourri, and so many other supplies through them! ----------------------------------------­­­­­­­­---------------------------- CONNECT WITH US: Facebook • https://www.facebook.com/desertcloudsoapworks FB Group • https://www.facebook.com/groups/desertcloudsoapworks/?ref=bookmarks Twitter • https://twitter.com/DesertCloudSoap Instagram • https://www.instagram.com/thearizonaroad/ Etsy • https://www.etsy.com/shop/desertcloudsoapworks Most items we make can be found for sale in our Etsy shop, but they don't last long! (Sometimes only hours!) ----------------------------------------­­­­­­­­---------------------------- CHECK OUT OUR OTHER CHANNEL: https://www.youtube.com/user/TheArizonaRoad ----------------------------------------­­­­­­­­---------------------------- BECOME PART OF THE TEAM! JOIN OUR PATREON! https://www.patreon.com/desertcloudsoapworks ----------------------------------------­­­­­­­­---------------------------- WANT TO SEND US SOME MAIL? HERE'S OUR ADDRESS: Desert Cloud Soapworks PO Box 25583 Prescott Valley, AZ 86312 USA ----------------------------------------­­­­­­­­---------------------------- Do you know how Awesome you are???? ----------------------------------------­­­­­­­­---------------------------- • Business | Licensing | Sponsorship | Collaboration • arizonaroad@outlook.com ----------------------------------------­­­­­­­­---------------------------- CAMERA(S) USED: Canon SX720 HS GoPro Hero 6 Black GoPro Hero 5 Black GoPro Hero 3 White Edition YI 4K Action Camera ----------------------------------------­­­­­­­­---------------------------- MUSIC SOURCES: Kevin MacLeod - https://incompetech.com/ Dan-O - http://www.danosongs.com/ NCS - http://www.ncsmusic.com/ Sivermansound - https://www.silvermansound.com/ Audionautix - http://audionautix.com/ TheFatRat - https://the-arcadium.net/ Or the YouTube Music Library ----------------------------------------­­­­­­­­---------------------------- Finally, I appreciate you watching my video and I hope that you have subscribed. For the safety and peace of mind of the YouTube community, I will not tolerate any kind of hate speech, bullying, threats, or hateful comments on my videos or channel, either directed towards me, my family, or other users. People who do this are blocked and banned from my channel without warning. If you don't have anything nice to say, don't say anything at all. Let's all get along and have a nice time on here. ----------------------------------------­­­­­­­­---------------------------- ***STAY AWESOME EVERYONE!***
DIY Wood Soap Mold Project. Yes!!! I finally did it, and Lowes Cut the Wood For Me!!
 
45:03
This is intended to show how I built my soap molds, not necessarily a full tutorial. I do not know nearly as much as many out there so, please do your research before embarking on this task. I did hours of research, reading, planning before starting this project. I am including the measurements and supplies I used. I'm hopeful that my next project will be to create tall skinny wooden molds. Look for that video in the future!! I hope this is helpful, feel free to comment if you have questions. I will try to answer and be as helpful as possible. Thank you for Subscribing, liking and commenting!! Visit my Etsy store to purchase my Soap and Body/Bath products here- https://www.etsy.com/shop/SpicyGingersSoap Supplies: 2-Poplar Wood Boards sizes as follows; 1- 5.5'" x 0.75 x 6' 1- 3.5" x 0.75 x 8' 4- 1/4" nuts 4- 1/4" washers 4- 5 1/2" Hex Bolts 2" Wood screws Drill/Driver(Optional but very helpful) I bought the Black + Decker 5.2 AMP 3/8" Drill/Driver Drill Bit collection 3M All Purpose Medium Grit Sanding Block Measuring tape or Ruler Pencil for making markings for placement I made 2 Wood Soap Molds Outer Dimensions- 14/5" x 5.5" x 4.5" Inner Dimensions- 12.75" x 3.5" x 3.5" My Wood Board Measurements after Lowes cut them for me from 5.5" x 6' and 3.5" x 8' for 2 Wood Mold- 2 x Base Boards- 14.5" x 5.5" x 0.75" 4 x Side Boards- 14.5" x 3.5" x 0.75" 4 x End Boards- 3.5" x 3.5" x 0.75" I have a leftover piece of wood 19.5" x 5.5" x 0.75" Directions: I sanded all pieces of wood. Then I drilled my pilot holes with a 9/64 drill bit on the bottom of the side boards and corresponding placement on the base board (you can decide how many screws you feel comfortable using on the bottom of your mold). On my first mold I placed the pilot holes/screws every 2", but decided this was more than necessary and only placed 4 screws on each side of mold on second mold. I then made my pilot holes on one of the end pieces for my stationary end, and Larger holes (final whole 5/16 drill bit) for Hex Bolts. I used 3 drill bits smallest to largest to avoid splintering wood. I used the 9/64 bit first, then 3/16, and then the last and largest hole is the 5/16 drill bit for placing the Hex bolts for the removable end of the soap mold. Next I screwed the base to the side board with my 2" screws. Next I screwed one end board for stationary end of mold. And last I placed my hex bolts into the removable end of the mold. Viola! Good Luck!! I hope you are successful in your projects if you decide to build your own soap molds!
Views: 5746 Spicy Ginger's Soap
How to Line a Wood Soap Mold
 
07:35
Thank you for watching! To purchase your soap molds please use this link. I was unable to add them to the BeScented website but I am now able to combine orders! Anything purchased from my soap site can now be combined with a BeScented order to save you shipping costs. Just leave a note on your order for me. www.anssudsnsuchllc.bigcartel.com
How to make improvised soap mold partitions or dividers for any slab/loaf mold for soap making 103
 
05:01
DIY improvised soap mold partitions or dividers using corrugated plastic board. now you dont need to cut your soaps, you just slide it out from the partitions. the corrugated plastic boards are washable and reusable too. Video link on actual usage of the mold partitions: https://www.youtube.com/watch?v=iD1E723t6iI&t=237s Hi I'm Cathy, D' clumsy soaper. Sharing with you my handmade soapmaking crafts. Subscribe to keep you posted on my weekly soap making video uploads: https://goo.gl/xf54dG Like and comment if you enjoyed the video. feel free to share to your friends too. May you have an awesome and soapy day. Connect with me: YouTube: https://www.youtube.com/user/cathzie05 Twitter (@clumsysoaper): https://twitter.com/clumsysoaper Instagram (@clumsysoaper): https://www.instagram.com/clumsysoaper/ Facebook page (D' Clumsy Soaper): https://www.facebook.com/D-Clumsy-Soaper-133487073871934/ Facebook group (Soap Makers Hub): https://www.facebook.com/groups/soapmakershub/ Italian Morning by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org/
Line a Wood Soap Mold the Easy Way
 
03:33
A very quick and easy way to line a wood soap mold. Use freezer paper and Blue Sticky Tack.
Views: 15101 Dorothy Martin
How I Made My Soap Slab Mold.
 
23:43
Making my first DIY soap slab mold. How to make a soap slab mold? It was very easy to make. The only hard part was putting on the hinges. If you would like to know how to came up with the dimension for a soap slab mold to a certain size soap leave me a comment below. ___________________________________________ S U P P L I E S U S E D: Birch Wood 2ft x 4ft Premium Interior wood screws 8x 1 1/4" Hinges Eye Screws bungee cords
Views: 4132 Whitney Lowry
Soap Making 101 - How to Line Your Wooden Soap Mould
 
01:44
A quick tutorial on how to line your wooden soap mould to prepare it for soap making at home. For more information visit; http://www.littlegreenworkshops.com.au/
How to Build Soap Molds in the Work Working Shop, Lye Soap Making Molds
 
29:42
My Father and I Building New Soap Molds in the Work Shop. These are the New Design with the Let Down Sides and Ends. See how they are Made. I Have Conbinded a 3 part Video after I got approved for longer videos. ENJOY! I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Views: 37656 EssentialSoap
Making Mold Liner
 
07:07
Short tutorial on making a mold liner using a flexible cutting mat. http://evesgardenhandmadesoaps.com https://www.facebook.com/evesgardenhandmadesoaps
Views: 4119 EvesGardenSoaps
How I Made My Wooden Tall & Skinny Soap Molds
 
05:55
This is a simple how to make Tall & Skinny Wooden Molds for Home made soaps. Tall and skinny molds can be a little hard to find as well as a little pricey. So I decided that i would try my hand at making one and ended up with 2. I have added measurements in the video as well. This was super easy and cheap, costs less than $15 :) So please take a look and see if it's something that you would like to try.
Views: 9269 Eden's Garden Soaps
Silicone Soap Mold From Idea To Wood Pattern To Silicone Mold To Soap
 
13:24
I had to fix and republish this vide. In this video I followed up on an idea i got from watching other YouTubers make silicone molds. My idea was to not only make a very large soap bar, but to put some writing on it. Hey, it wasn't perfect, but, it worked exactly like I figured. And, it was fun. This is a very cheap way to do it yourself. I don't use the chlorophyll anymore after this batch because I think it produces an odor I do not like. Music created for me and courtesy of, YouTube channel, "TheMineDestroyers": https://www.youtube.com/channel/UCio_05Ef64t5FjgChuYRVAg
Views: 9942 Mity Mouse
No Liner Soap Mold Instructional Video 001
 
02:58
Never line your soap molds again, our molds have a non stick surface to make soap making easier. Lifeworks molds will save you time and money. For more information or to purchase, visit www.lifeworkssoapcompany.ca
Views: 51971 Lifeworksbylaura
Example of a Quality Soap Mold
 
02:05
Here at Soaps and Scents HQ, we have a lot of devices used for making soaps. I'd like to show you one of them today; it's called a Log Mold. Log Molds are basically wooden containers that contain the viscous soap until it hardens to the point where it can be cut into individual bars. These molds were handmade by a lady I knew but she is no longer in business so you'll have to do some research to find your own log molds. This particular mold is a 3 part mold. My favorite feature of these molds is that they have a silicone liner. These give the finished soap a nice smooth finish all the way around. It also makes it a breeze to unseat the soap once it's cooled. Silicone molds are so much nicer than having to line your molds with butcher paper. These molds are 3 piece; the mold, the insert and the lid. Once the soap has been poured into the silicone liner inside the wooden mold you place the wooden lid on top. Later, once the soap has hardened completely, you can flip the whole thing upside down and unscrew the side walls. Jiggle the mold a bit and the silicone mold will come free and rest on the wooden lid. Once your upside-down-soap is free from the wooden mold, you can pull the sides of the silicone mold a bit to release the air from the mold. Then you simply have to pull the silicon mold up and viola, your hardened soap log is done and ready for the next step.
Views: 33504 SoapsAndScents
Easy way to line a soap mold
 
07:14
Hello Sab here, I hear often how soapers hate to line their molds. So here I am going to show you how the Soap Boss taught me! This is a no fuss, no headache method and your liner will look pro every time. Thank you Soap Boss. Love! www.sabssoaps.ca Music: http://www.bensound.com/
Views: 41001 Forever Soapworks
How to Make a Soap Mold For Free - Soap Mold Secret
 
07:15
The Soap Guy gives insight into the molds and techniques used at The Soap Guy, and shows you how to make a mold for free!
Views: 200667 Jeffrey Dorrian
DIY adjustable soap mold
 
06:09
Diy signs, other diy home decor More signs or to order below. Follow me on instagram! https://www.instagram.com/gourmetjunk5/ Facebook—— https://m.facebook.com/Gourmet-Junk-147907285919133/?ref=bookmarks You will need. dimentions are 3 feet long, 6in wide. 1X6 1X4 1/4 in create a bolt rod 1/4 in create a bolt nut kit 1/4 in course 2in wood screws. 1/4 drill bit
Views: 2381 Gourmet Junk
BATCH soap making - Pour Traced soap into Wood Molds
 
05:07
Pour Traced soap into wood molds lined with chlorine free and compostable wax paper for BATCH No. 0083 Organic Lemongrass and Chamomile formulated handmade vegan soap bars handcrafted with certified Organic oils, herbs and extracts. Artisan soap by BATCH New York Transparent Organic Sustainable Skincare, Soap, and Candles!
Views: 14277 BATCH ORGANICS LLC
DIY wooden soap mold
 
07:54
Making a wooden soap mold with Ricky
How to Build a Soap Mold Part 1
 
05:34
How to build a wood soap mold Part 1. By Keith Brown
Views: 34103 kebrown1980
How to make a soap mold with hinges for less than $20
 
02:55
This mold has a simple design and is easy to make, here is the list of supplies: 1 square of plywood big enough for the pieces 2 6 inch bolts 4 washers 2 wing nuts 4 small hinges Cut the plywood into the following pieces 1 17.5 inch x 6.5 inch (bottom) 2 17.5 inch x 4.5 inch (sides) 2 4.5 inch x 3.75 inch (ends) Drill 2 holes in each side 1.5 inches from edge in the center. Attach the two sides to the bottom with hinges 1 inch from the edge. insert bolts, washers, and wing nuts. Insert the end pieces and tighten your bolts. Line your mold as you would any other wooden mold. When you are ready to remove your soap, unscrew your bolts and open the sides of the mold for easy release! Investing in a good quality saw will really make this project easier, at some parts you see me struggling, and this is because the saw I used did not make even cuts. Find me on youtube: https://www.youtube.com/channel/UCeNueMWn5yzBDObuaQvR92g If you would like to purchase from me, find my shop below: https://www.etsy.com/shop/Lassarina Find me on Social Media! Facebook: https://www.facebook.com/BoysenBerrySoaps/ Instagram: https://www.instagram.com/lassarina85/
Views: 1619 Boysenberry Soaps
Soap making 101: Choosing a Soap Mold
 
10:39
This video will give you some basic information about choosing a mold for cold process, hot process and CPOP soap-making. Where to buy the molds: Silicone Molds - www.wholesalesuppliesplus.com Wooden Molds: 1lb Mold (larger) - http://www.etsy.com/shop/togsoapmolds 1lb Mold (smaller) & 3lb Log Mold - http://www.candlesandwoodcrafts.com The Slab mold with the cutter was purchased on EBay Check us out on FB http://www.facebook.com/helenshands Check out my Blog for more soap-making info http://mysoapylife.blogspot.com/ Check out my website: www.helenshandssoap.com
Views: 4992 The Soap Making Maven
Best soap mold ever!
 
01:48
Easy to build and use soap mold!
Views: 6392 Bluebirdbeesupply
How To Make A Free Wood Soap Cutter
 
11:50
This is a very simple soap cutter made from scrap wood and gives you perfect 1 inch thick bars of soap every time. For those of you who make soap at home this is a very simple project that makes cutting your bars of soap easy. I have been making soap for many years now but have always used it for myself or given it way. So it did not matter if I hand cut the soap and it was not perfect. But for commercial sales of homemade soap you will need a soap cutting form to aid in getting the perfect thickness every time. I made my soap cutting form wider so that I can always put in larger bars of soap. I often use a silicone bread form which tapers on the top, making it wider there. I want to keep my options open. And also some of the soap cutters out there are too tight to slide your bar of soap through easily. I wanted to have room to slide the soap no matter how wide. The exact dimensions of your soap cutter do not matter except for the notches for cutting the soap bars. I made mine between 3.5 and 4 inches wide on the base. The length is about 14 inches. The height is about 3 inches. The height is the only part that you must watch for because you want the side walls higher than the bar of soap you want to cut. The slits in the sides will guide your knife evenly through the soap. To make the slits I used the table saw first and then assembled the soap cutting form. Then I finished the cuts through with a backsaw. I cut a little bit deeper into the base to allow my knife to pass through the soap and into the base a bit. All I needed on the front end was a piece of wood to stop the soap from sliding forward at the right point. Now I can slide a bar of soap into the cutter and push it forward until it stops. Then I can slide a knife through the soap, making a perfect one inch thick bar. Thanks for watching. Please Subscribe & follow my daily videos. Troy http://www.thedoityourselfworld.com http://www.theoffgridproject.com ------------------------------------------------------------------------------------------------------------- CHECK OUT OUR OTHER CHANNELS: Off Grid Homesteading With Melanie: https://www.youtube.com/channel/UCFRwlShDuXP5WXdtXV15rAQ The Do It Yourself World Electronics: https://www.youtube.com/channel/UCMIqpFAOBkppGkgrSC11p6Q TR Tech Tactical & Survival: https://www.youtube.com/channel/UChPdsvwahC2wh8lvWs6ud4g ------------------------------------------------------------------------------------------------------------- Join our Patreon account for special videos and footage, prizes, gifts and more: https://www.patreon.com/TheDoItYourselfWorld Watch, comment and earn money on my steem channel: https://steemit.com/@thediyworld Join my TopBuzz channel and share your ideas and comments: https://www.topbuzz.com/user/6477165683338642441 ------------------------------------------------------------------------------------------------------------- Note: Copying this video, in part or in full, is a violation of copyright unless the user has express permission from the owner. Violation of this copyright will be pursued to the fullest extent of the law.
Homemade Soap Molds
 
03:03
Making custom traditional wooden soap molds for your homemade soap. See the other videos for soap making basics!
Views: 658 HNX Media
PVC SOAP MOLD HOW TO detailed
 
06:23
UNMOLDING PVC MOLD SOAP..https://youtu.be/IeJiY9jDeJg
DIY PVC Soap Mold
 
07:04
via YouTube Capture
Views: 52635 Homecraft Soaps
How to make a wooden soap display-diy
 
05:20
This display can be used for more than just soaps! It is SO easy to make and the supplies cost under $14 at Home Depot. You need: 1 - 1x4, cut into two 9", two 6" and two 3" pieces 2 - pieces of poplar .5 x 3.5 x 36, cut in 18" pieces, you will only use three of those pieces 1 - piece of poplar .25 x 2.5 x 36, cut in two 16" pieces drill 1/16" drill bit wood glue finishing nails ruler pencil sandpaper- you might want to sand down the edges of the wood
Views: 11173 The Yum-Yum Shoppe
Making tall and skinny soap mold, How to make a soap mold,  Making a wooden soap mold
 
12:49
Here at Soaps N Suds N Such we hope to bring you videos you will enjoy thanks for watching remember to subscribe and like. We now have a Patreon through which you can support the growth of our channel https://patreon.com/SoapsNSudsNSuch I ordered one tall and skinny mold from http://www.bulkapothecary.com/tall-12-loaf-silicone-soap-mold/ but I wanted some wooden tall & skinny molds and some that were actually taller than the one I ordered so my husband made me several that are like the one I ordered only wooden and several that are taller for a really tall bar I love them just line them with freezer paper and pour my soap he is a sweetheart.
Views: 1751 Soaps N Suds N Such
DIY Ten Wire Soap Cutter For $20  *Make It Yourself!*
 
21:53
My other channel is at this link: https://www.youtube.com/channel/UCPcbN24J4Yv0qa13e72X34Q Material I used for this project: 1"x 3" wood plank 15/16" Screw Eyes 24 Gauge Galvanized Wire Flat corner brackets 1 1/2 " Screws
Views: 129809 Jan Garcia
How to make a soap mold- soap making
 
08:17
Today, I want to show you how to make a soap mold the cheap and easy way. We'll also talk a little about some of our permanent molds. Our site: www.unclejonssoap.com Email: unclejonssoap@gmail.com Lye calculator: http://soapcalc.net/calc/soapcalcwp.asp
Views: 8071 Uncle Jon's
Soap Making - The perfect wooden soap mold - a prototype
 
08:17
My attempt to make the perfect wooden mold WITHOUT any power tools. What can I say, I'm a computer techie. :-D
Views: 36640 BareAlchemy
DIY how to make a wooden soap mold
 
09:10
you need to buy a 1x4x6 cut 2 16 inch pieces and 1 14 and 3/8 inch for lid and 2 4 inch pieces and a 1x6x4 cut to 16 inch piece for bottom. I used POPLAR. 2-2pkg hinges (cheep ones under 2 bucks) 4- 2 inch wood screws, 1 knob Thank you for viewing! If you like it like it and subscribe! if you love it pass it around! Have a suggestion? Leave it in the comments or better yet a video response! MWAH! http://www.etsy.com/shop/OurSacrificialGoat Drop me a postcard or send me something to review! Wendy Smith PO BOX 362 LYNN HAVEN FL 32444
Views: 17669 ladywendy0
DIY Tutorial on making LARGE soap log molds for less than $20
 
13:11
Hey soapers, I've been wanting to get out of making small batches as I realized it is a huge waste of time. I was spending more time in the kitchen making soaps then cooking. My poor daughter came home happy thinking she saw mashed potatoes in the crock pot, had to tell her it was soap... "wow mom soap for dinner AGAIN" lol. For weeks I've been trying to figure out how I am going to make the big jump on a tight budget. All the large molds I was looking at are more then $50, ain't no body got time or money for that. So I decided to try it out myself. I am sooooo happy I did. For less then $20ish (I live in Miami), I picked up 7 single pre cut wood. I kept 6 whole and had them cut up the 7th one. Home Depot Poplar (wood) buy 7 .25 thickness (sorry I kept saying 25 it's .25) 3.5" width 36" length Gorilla wood glue **keep 6 in it's original state the 7th one ask them to cut it to make ends to close the mold and one cut smaller for the inside (to use as a divider if needed) I was able to make two large molds. How many bars did this make? I have a Bud cutter that cuts my bars 1.25" which are large so I came out with 23 large 8oz bars. As I do most of my bars I turned around and cut them in half to make 4oz bars. So total bars for me is 46 bars. Hope this video will help you make the jump to making bigger batches. Stay tuned to my Turmeric Facial Bar video where I cooked this big batch for the mold. Let me know when you make yours on how your process went. -Donata xo ...***I repeated some things several times.... sorry :-P Enjoy the video. Thanks for watching. Don't forget to subscribe! Have questions on taking better care of your skin? Join the conversation on Facebook group where I share tips and information on taking care of your skin inside and out. :) https://www.facebook.com/groups/donataskinfood/ Visit our shop: Donata Skinfood www.donata.co Instagram: http://instagram.com/donatasco Facebook: http://facebook.com/donatasco Twitter: http://twitter.com/donatasco Pinterest: http://pinterest.com/donatasco Blog: http://www.donata.me Shop Located at: Skinfood and Facial Services @ Yellow Green Farmer's Market #186 1940 N 30th Road, Hollywood, FL. 33021 Saturdays & Sundays 9am-4pm Products also available at: Kathy's Place Hair Salon 1903 Harrison St Hollywood, Florida
Views: 936 Donata Skinfood
Olala Flexible Rectangular Soap Silicone Mold Wood Box Review
 
02:05
Olala Flexible Rectangular Soap Silicone Mold Wood Box Review. This product available on: http://amzn.to/1SDQj2g
Views: 1207 LM Reviews
Wooden Soap Molds
 
03:07
Visit http://www.soap-making-resource.com/wooden-soap-molds.html to view and order my uniquely designed wooden soap molds.
Views: 78391 SoapMakingResource
DIY Plastic/Silicone Liner
 
23:15
In response to viewer requests, this video shows how I make DIY plastic/silicone liners for my custom-size wood molds. The silicone sheeting that I got on Amazon is not available at this time (May 2018) but may be back in stock soon. Here are some alternatives: https://www.amazon.com/Silicone-Rubber-Gasket-Flexible-12x20x1/dp/B071FFJGSC/ref=sr_1_5_sspa?ie=UTF8&qid=1525448564&sr=8-5-spons&keywords=silicone+sheeting+1%2F32&psc=1 36" x 5' $62. http://www.rubbercal.com/sheet-rubber/silicone-rubber/silicone-commercial-grade-red-orange-60a.html Making Soap in this liner: https://youtu.be/sGAyU3PtnFE http://evesgardenhandmadesoaps.com https://www.facebook.com/evesgardenhandmadesoaps https://twitter.com/EvesGardenSoaps
Views: 3244 EvesGardenSoaps
KittenLab | My First 10x12 Box Soap Molds DIY
 
02:41
Making our first "big batch"soap molds at home!! was a huge save of time and $ :) get your measurements then straight to home depot.... Careful with sanding your piece - wear protective glove and nails.....needless to say, have someone next to help you.... Looking forward to use those... Music www.bensound.com
Views: 600 Yog Maya
Making a wood soap mold :D
 
00:58
My mega box of craft sticks! \o/ Making a wood soap mold 3-4 lb More videos to come~
Views: 362 Jen SoapySuds
How to Make a Liner for Wooden Soap Molds
 
10:32
In this video, I'll show you how I make a liner for my wooden loaf soap mold using one sheet of freezer paper. For more information, please see my blog post: http://lather-be-soaping.blogspot.com/2012/08/how-to-line-wooden-soap-mold.html
Views: 7799 I'd Lather Be Soaping
DIY Botanical Soap { For Beginners! } | Royalty Soaps
 
12:31
Looking for a super simple soap making project for beginners? Maybe even to do with your kids? I gotchu fam. Today my two little sisters and I have a tutorial for a melt and pour soap loaf made with botanical ingredients! Links below! ----------------------------------------------------------- ♕ I N G R E D I E N T S ♕ Citrus Melt and Pour Soap Base - http://bit.ly/2xcv9FQ Coconut Lime Verbena Fragrance Oil - http://bit.ly/2yDeVHm ♥ Organic Poppyseeds - http://amzn.to/2gWyX7Y ♥ Calendula Petals - http://amzn.to/2xVw3uI Velvet Pearl Mica - http://bit.ly/2vjJRKr ♕ E Q U I P M E N T ♕ ♥ LOAF MOLD - http://amzn.to/2l4STtY ♥ Ceramic Knife - http://amzn.to/2yGX2Yp ♥ Bamboo Cutting Board - http://amzn.to/2yF0iF1 ----------------------------------------------------------- ♕ S O C I A L ♕ W e b s i t e - http://goo.gl/VPo4Gb T w i t t e r - http://goo.gl/YSR7h5 P i n t e r e s t - http://goo.gl/5IhPfA F a c e b o o k - http://goo.gl/Bpru7O I n s t a g r a m - royaltysoaps ----------------------------------------------------------- ✉ L E T T E R S & P R ✉ Katie Carson P.O. Box 270531 Dallas, Texas 75227 ----------------------------------------------------------- ♕ D I S C O U N T C O D E S ♕ **Ebates I do a TON of shopping for soap supplies online and eBates lets you get rebates at nearly every major online retailer, including Amazon, eBay, and Etsy. I literally save money just by opening up a tab in my browser via their link. I have already received a check from them within the first month so I just thought I would let you guys know about this since we soap makers and DIYers buy so much online! Plus, it's free! Yippee! :D LINK - http://bit.ly/2ggu07w **Airbnb Whenever Caleb and I travel, we try our best to stay in Airbnbs. It's WAY cheaper than getting hotels and are often more personalized, comfy, and unique. We literally have stayed in absolutely amazing, private homes for $35 a night! You can use the link below to get $35 travel credit when you sign up. :) LINK - http://bit.ly/2gzQzI5 **The Bouqs Get a free bouquet with your first purchase! Send a bouquet to a loved one and get one for you in return! These are my favorite flowers and the ones I send to my Mum and Grandmother for anniversaries and birthdays. And myself, I'm not going to lie! haha LINK - http://bit.ly/2fO9YTU ----------------------------------------------------------- Disclaimer: Items marked with a (♥) are linked with an Amazon Affiliate Link. I am paid for each click or purchase made via this link. I genuinely love Amazon and purchase a lot of items from them for both business and my home so partnering with them is a dream come true! :D Items marked with a (*) were either mailed to me, given to me at a convention, won in a contest, etc. I am not paid to use any of the products mentioned, if I use it it's because I like it and mentioned it because I think you will too! Anything marked with a (**) is a link that benefits me in some way. This means that if someone purchases a product through this link I get something in return, like "points" or something free, but I'm not being paid in cash by the company. It's not an "affiliate" link. Anything marked with a (***) means that this video has been sponsored by another company and has gone through a lot of hoops to get there. I don't do many paid collaborations but when I do, I reserve the rights to express only honest opinions.
Views: 241711 Royalty Soaps
How to Make Silicone Soap Mold Liners S2W30 {part 2}
 
05:31
Season 2 Week 30 of Soaping101 and we are creating a reusable custom soap mold liner. Soaping101 Merchandise: http://www.soaping101.com Supplies needed to make this soap... Castin' Crafts Mold Builder: http://www.amazon.com/gp/product/B001EU9KXS/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001EU9KXS&linkCode=as2&tag=soaping101-20 Join us in our facebook group: http://www.facebook.com/groups/soaping101 Like Soaping101 on facebook: http://www.facebook.com/soaping101 Royalty free music by Kevin MacLeod.
Views: 97324 soaping101
6-cavity rectangular soap silicone molds soap making supply diy CCM-033
 
00:44
6-cavity rectangular silicone molds soap making supply diy CCM-033 (pangolinphone.memorypack.com.tw) 1模6穴矩形長方型矽膠模具 CCM-033 Model: Rectangle soap molds square soap making supply CCM-033 (pangolinphone.memorypack.com.tw) Standard: Food and Drug Administration Registration Mold Material: silicone mold Cavity Dimensions: 80 x 55 x 25 mm Cavity Capacity: about 100 gram ( 3.5 oz) Specification: 6 cavities Mold sizes: 213 x 234 x 25 mm Mold weight: 130 gram Details about the carton: Model CCM-033 = 100 pieces = 1 carton = 490 x 440 x 640 mm = 4.87 cubic feet = 28 KGS (14.2) For more information, please feel free to contact with us Emails: barret-chen@memorypack.com.tw sales01@memorypack.com.tw shop@memorypack.com.tw superpolu@gmail.com shinly@ms18.hinet.net Websites: www.memorypack.com.tw www.shinly.com.tw www.wjp-memorypack.com pangolinphone.memorypack.com.tw Memorypack 藝術模具手工皂模矽膠皂模金屬母模MPK silicone molds silicone loaf molds silicone bar soap molds silicone bar soap tray mold silicone bread baking molds rectangle soap molds rectangle soap making rectangle silicone molds rectangle soap making supply rectangular soap molds rectangular soap making rectangular silicone molds rectangular soap making supply square soap molds square soap making square silicone molds square soap making supply soap making soap making supply soap molds bar mold soap tray mold bath soap making bath soap making supply bath soap molds bath soap mold bath soap tray mold handcraft soap making handcraft soap making supply handcraft soap molds handcraft soap mold handcraft soap tray mold diy soap making diy soap making supply diy soap molds diy soap mold diy soap tray mold wjp wjp memorypack wjp memory pack memorypack memory pack MPK 方格手工皂模 方格矽膠模具 方格皂模生產 方格皂模製造 方格皂模批發 矩形手工皂模 矩形矽膠模具 矩形皂模生產 矩形皂模批發 矩形皂模製造 方形手工皂模 方形矽膠模具 方形皂模生產 方形皂模批發 方形皂模製造 長方形手工皂模 長方形矽膠模具 長方形皂模生產 長方形皂模批發 長方形皂模製造 方磚手工皂模 方磚矽膠模具 方磚皂模生產 方磚皂模批發 方磚皂模製造 silicone molds silikon kalıpları silikoneforme Silikonazkoa シリコンモールド pakete silicone moldes de silicona सिलिकन molds szilikon formák cetakan silikon 矽膠模具 硅胶模具 सिलिकॉन molds moules en silicone תבניות סיליקון καλούπια σιλικόνης সিলিকন ছাঁচ silikon molds แม่พิมพ์ซิลิโคน силіконові форми acuan silikon قالب سیلیکون formy silikonowe silikoni muotit قوالب السيليكو Силиконовые формы силиконови матрици силикон қалыптар mowldiau silicon silikono muldiloj silikonové formy siliconen mallen molds Silicone khuôn silicon силиконски калупи Silicone formas Silikoonvormid múnlaí silicone silikon formar stampi in silicone moldes de silicone Silikonformen සිලිකන් අච්චු 실리콘 몰드 matrite din silicon Memorypack Industrial Co., Ltd POLU industrial Ltd Shinly Plastics corporation WJP memorypack industrial Ltd
Lining My Wooden Soap Mold:)
 
12:40
Preparing my wooden mold for my rainbow galaxy soap:)
Perma-Lined Soap Mold - 1lb Hinged Wooden/Silicone/HDPE Soap Loaf Mold
 
04:35
Perma-Lined Soap Mold - 1lb Hinged Wooden/Silicone/HDPE Soap Loaf Check them out here http://www.custom-soap-stamps.com/listing/270156693/perma-lined-soap-mold-1lb-hinged
Views: 505 Custom Soap Stamps